1 The cable and PCB, by which the power divider was made, were both adopted in the feeding circuit net work.

2 Millimeter-wave T-shape waveguide power divider is widely used in the millimeter-wave systems because of its much more simple structure and easy to manufacture.

3 In Chapter Three, the basic theory of power divider is introduced firstly. Then the present situation of coplanar waveguide power dividers is introduced briefly.

4 These may be realized by power divider and phase shifter.

5 The power divider for ensuring two AO Q? switch synchronization and effective power driving is designed.

6 It also designs a compact unequal power divider and solves the problem of vertical transition of multi-layer network that can greatly reduce the volume of feed network.

7 Moreover, a H-plane waveguide power divider and an E-plane one are designed using two pairs of arcs and three pairs of arcs, respectively.

8 Good performances of the optimized power divider at both frequencies are obtained.

9 This type of matrix requires a power divider at each input and a multiposition switch at the outputs.

10 In this article , the radiating surface and power divider are researched in this paper.

11 Chapter 3 describes the characteristics of each component, circuit design, layout, circuit implementation, and measurement results of power divider and attenuator.

12 Design work has also built a system is very particular about the power divider, it has a lower frequency than traditional units in terms of series inductance values.

13 Power divider is the indispensably part, this paper designs microstrip power divider, equational and not equational.

14 This paper presents a novel broadband waveguide E-plane Tee junction power divider, and simulates and optimizes it with HFSS.

15 Not only simulate patch array antenna's EM performance, but also concern the affects of feed networks including power divider network, digital phase shifter, TR module etc.

16 A matching source method is presented for analysing microstrip hybrid ring power divider in this paper.

17 This paper mostly investigates dual-frequency base station antenna, electric tiled antenna, power divider and phone-shifter.

18 In the end, the author introduces DGS's applications in microwave circuit in detail,[www.Sentencedict.com] has designed high stages lowpass filter of DGS structure and Power Divider using asymmetric spiral DGS structure.

19 This paper improves the characteristics of lumped element impedance transformers and proposes new type power divider circuit and its design method.

20 In this work, the patch antenna and the unequal power divider were designed.

21 Considering the systems special requirement, a Phase changed network with switch is designed with power divider and microwave switch.

22 A method combining the generalized network theory with the planar circuit theory is presented, which is used to analyze and optimize the power divider.